Re-designing the workbench

Currently on my workbench is… well… my workbench.

20140108-124725.jpg

The workbench I have used for the past few years is a cheapo laminated chipboard job from Argos. The former office desk was forced into the role of being my modelling desk when we moved to Newbury in 2008. It has now taken a fair amount of abuse from my modelling torture kit, so it is only right that it continues in its role in my new house (until I accidentally cut in half or something or other).

In my new house the desk will be up against a radiator and I already suffer frequent losses of small items to the carpet monster (that darn carpet monster!!!).  I was also quite concerned that I will now loose small items down into the inside of the radiator. I decided that I would install a backing to my desk that will hopefully prevent small items from ‘pinging’ away.

I purchased x3 framed cork note boards from Staples and went about screwing them onto the back of the desk. Being lazy, I decided to screw them onto brackets and let the boards hang off the desk (as oppose to cutting the boards and mounting them on the top of the desk). There was still an annoying gap between the cork boards and the desk when they were screwed down so I tacked down some white ‘L’ shaped plastic to cover up the gap.

20140108-124835.jpg

Now I will hopefully see a significant reduction in my time spent crawling under my desk looking for small brass bearings. The added bonus is that I can now use the cork to pin up instructions and notes, which will be very helpful.

20140108-124847.jpg

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s