Tag Archives: Toby

Model Rail Magazine to produce Wisbech and Upwell J70 Steam Tram

Rumours from Warley National 2016 indicate that Model Rail magazine are considering commissioning a Wisbech and Upwell J70 Steam tram,  famously associated with Toby the Steam Tram from The Railway Series ( and the Thomas and Friends TV series).

Model Rail are requesting feedback on livery options and whether to produce a version with opening doors, sounds and removal sideplates!

I know what I’d choose (all of the above).

These models will be more than welcome on Brewery Pit, so I look forward to hearing further news. Pictured below are my J70 and Y6.

Brewery Pit 02

Advertisements

Rolling Stock – J70 0-6-0 Tram Engine

In this series of articles I will introduce the locomotives that I operate on Brewery Pit.

20140110-200031.jpg

The Prototype
One of the main engines that see’s regular use is my J70 steam tram. The J70s were introduced to replace the ageing Y6s, and were famous for running on the Wisbech and Upwell Tramway in Cambridgshire. J70s and Y6s look very similar from the outside, but are quite different underneath the tram body. The fundamental difference is that J70s have six wheels (0-6-0), while the Y6s have four wheels (0-4-0). The side skirts are also formed in a slightly different way, with the J70s including moulded foot steps (Y6s have ladder-like steps) and a curved lower section to the skirt.

The model
My model is made from a Silver Fox resin kit that was bought for my birthday in September 2006. I opened up the side windows using a knife and added hand rails. I decided that I wanted my steam tram to include a boiler, and I just happened to have a Dapol plastic pug kit lying around (many railway modellers do, for some reason). I cut up the boiler and mounted it onto a piece of plasticard and added some hand wheels to either end. The boiler isn’t accurate as it has a saddle water tank, but I didn’t really care at the time (and still don’t).

20140110-200125.jpg

20140110-200133.jpg

20140110-200141.jpg

Painting
I wanted to represent an engine running between 1948 and 1950, so I purchased as many books as possible and looked at the photos of the various steam trams and settled on No. 68217, which was one of the last steam trams to run on the line.

I weathered the boiler using weather powders and sealed it with a matt varnish.

20140110-200449.jpg

The tram was painted with a now discontinued shade of brown from Tamiya’s acrylic range (I think it was Tamiya, I can find out if anyone really needs to know).

The final weathering job shown in the pictures is not accurate to how the model now looks, as it was repainted to better fit in with my Y6 later on.

Power
You cannot obtain a 0-6-0 chassis which would fit such a small loco, so there is little choice but to install and 0-4-0 power bogie. I was a little excited at the time I bought the kit and urgently insisted a black beetle motor bogie be sent out to me ASAP. Unfortunately, the wheelbase (distance between each wheel) of the bogie was quite wide, now I know that this is a skirted loco and little of the wheels is seen, but when it is seen it looked weird.

The motor bogie was converted to DCC control and was a poor runner and it was eventually replaced with better black beetle bogie with spoked wheels (a nice touch), a shorter wheelbase and 27:1 gearing (meaning it can travel much slower than my previous 15:1 version).

My J70 is currently waiting to have a DCC ‘stay-alive’ capacitor to be installed, but more on that some other time.

20140110-200351.jpg